If none of these materials is available to you you can always elect faucet repair to soak rags or towels in hot water and wrap them around the frozen pipe. This will probably take longer than any of the methods previously mentioned.
There are two, one on each side of the toilet, closet bolts which hold the toilet to the floor. If there are caps over the bolts, remove or pop them open. Using a small crescent wrench unscrew the nuts from the bolts. Alternate side to side when unscrewing this will be much more important when reinstalling the water line repair bolts but alternate anyhow.
You don't want to be paying your plumber to clear the area before they start work particularly if you are paying an hourly rate. Empty cupboards and make sure there is nothing that may cost the plumber time and you money gaining access to the job.
Service magic only let's licensed and insured tradesmen advertise on the site so that would be a great place to start. I would recommend getting at least three different quotes from different companies. This way you have an exact price of how much your works are going to cost and you will know exactly what you are getting for your money. You will also get the very best price for that work. Most plumbers will often try and sell you work that maybe you don't need as they are trying to make a living.
If you do not have hot water in your home, it may be a bit tricky for you to attempt to find out what the cause is yourself. If you have a tank that is leaking, this may be the reason why you do not have any hot water. If you have an electrical unit, the causes may be things such as a bad heating element, fuses that are blown, an overload switch which is bad, circuit breakers not working properly or faulty thermostats. If you have a gas tank, the problems causing you to not have hot water line repair may include a problem with the thermocouple burners. In situations like these, it is imperative that you contact a reputable plumbing company to get everything squared away.
There are a lot of different shapes and styles of toilets but, with a few exceptions, they all work about the same. Water is released from the tank (many commercial toilets use a special valve instead of a tank) into the bowl to flush the waste into your drainage piping. Basically pretty simple, right?
Once you've located the water shut off, turn it off. Now, you can turn your attention to trying to contain the water damage caused by any leaking. Get towels, fans, blankets, or anything else to try and sop up water that is sitting on carpet or wood floors. Linoleum floors usually don't undergo much damage from having water sitting on them, unless there are cracks in the linoleum (often invisible) where the water can seep in. When your Queens plumber arrives, you will be one step ahead by following these instructions.